installation guidE

Security Tape

The surface must be clean & dry. If needed, clean the surface with 100% iso-propyl alcohol.

When applying tape, the minimum surface temperature is +40F.

Apply the security tape directly to the intended surface. Do not apply on top of other packing tape.

When sealing cartons, seal the opposing flaps on the top and extend the tape a minimum of 4 inches down each side of the box. Repeat this process for the bottom seam of the carton.

Sealing carton

If the cartons have excess 'spring' in the flaps, after applying the security tape on the flaps, use standard carton sealing tape to seal the edges of the flaps to the side of the box. Other options are to glue or staple the flaps closed before applying the security tape. Repeat this process for the top and bottom of the carton.

Sealing carton

Only apply security tape in a single layer. Do not apply security tape on top of other security tape.

On the recommended surfaces at 70F, the tamper evident feature should be functional within 1 minute of application. Other surfaces may require more curing time. If the tamper evident feature does not perform immediately, more curing time usually improves the performance of the tamper evident feature.

The various tape formulations we offer perform differently depending on the material surface and application conditions. We recommend testing tape samples under actual end-use conditions to confirm compatitibity with your specific application. We offer free samples for testing.

Questions? Need Help?
Questions? Need Help?